Durobumps Premium 1st Gen Tacoma Front Off Road Bump Stops. No Lift Required. DBF24R
DuroBumps are proudly made in the USA with dual durometer (hardness) rubber, providing smooth, progressive dampening that greatly reduces hard bottom-outs and allows for greater control and comfort compared to OEM bump stops, which can feel rock-hard on contact. With DuroBumps, you’ll gain better off-road control and comfort compared to OEM bump stops and eliminate the “shell-shock” effect experienced when hitting larger bumps.
DuroBumps off road bump stops have many benefits for Toyota Tacomas. DuroBumps 1st Gen Tacoma front bump stops will greatly reduce or eliminate hard impacts associated with bottoming out shocks and suspensions on Toyota 4Runners. DuroBumps will also reduce bump steer and increase maintenance intervals by absorbing shock loads therefore decreasing wear on critical suspension components. The DBR24R is the only aftermarket bump stop designed with a 14° taper, ensuring even contact upon engagement. Other manufacturers don’t list the third-gen 4Runner and first-gen Tacoma in their product applications. DuroBumps DBF24Rs are designed to be slightly taller than OEM bump stops but will not limit wheel up travel as they compress under load providing smooth, progressive dampening
Order now and get the off-road performance you need with DuroBumps!
Features and Benefits
-
- Better handling – Dual durometer (hardness) rubber allows DuroBumps to act as secondary coil springs, increasing the compression load progressively in a smooth, predictable fashion.
- 14° angle – With the Toyota Tacoma OEM bump stops being mounted to the lower control arm, the bump stop doesn’t contact the strike pad squarely. This causes shearing and damages the bump stop. DuroBumps’ 14° angle addresses the shearing issue by ensuring square, even contact.
- Mounts in OEM location – DuroBumps easily bolt into the OEM mounting location, ensuring a proper fit with no modifications.
- No loss of up-travel – DuroBumps will not reduce your suspension/wheel travel.
- Increased suspension life – DuroBumps greatly extends the service life of the other suspension components by absorbing the shock load and helping prevent bottom-outs. DuroBumps protects your critical suspension components from excessive wear and extends service intervals for your shocks, ball joints, and control-arm bushings.
- Reduced bump steer – By absorbing the suspension’s up-travel inertia, DuroBumps greatly reduce the energy applied through the tie-rod ends and steering rack, reducing shock load and wear and tear on inner and outer tie-rod ends, steering rack, and steering rack bushings.
- Small, compact, application specific – Designed for specific truck models. No “universal fit” spacers required.
- Smooth and silent – Unlike Hydro bumps, DuroBumps are whisper-quiet on contact.
- Solid mounting base – A 3/16″ steel base plate ensures solid mounting and strong support for DuroBumps. The base plate is powder-coated to help prevent corrosion.
- Provided mounting hardware – Every set of DuroBumps comes with JIS 10.9 zinc-coated hex-head metric bolts and single-use thread locker, ensuring a strong, secure fit.
- Premium bump stops – DuroBumps are proudly made in the USA from the highest quality raw materials. You won’t find a higher quality bump stop anywhere.
Note: For off-road use only. By installing these aftermarket bump stops, the user assumes all risk and liability. DuroBumps are not designed for towing applications. For more information, click here. Seller will not be held liable for any damages or loss associated with the installation or use of this product for any reason.
Vehicle application
1996-2002 Toyota 4Runer
1996-2004 Toyota Tacoma
| Weight | 18.5 oz |
|---|---|
| Dimensions | 2.5 × 2.25 in |
| Part #: | DBF24R |
Dimensions
- Diameter – 2.5 in. (63.5 mm)
- Height – 2.25 in. (57.15 mm)
Be the first to review “1st Gen Tacoma Front Bump Stops (1995 – 2004) DBF24R”
Related products
GX460 2010-2023
Lexus GX460 Rear Bump Stops 4.25 Inch Tall (2010-2023) DBR425
2nd Gen 2005-2015
2nd Gen Tacoma Rear Bump Stops 3.5 Inch Tall (2005–2015) DBR35TU
4th Gen 4Runner 2003-2009
3rd Gen 2016-2023
3rd Gen Tacoma Rear Bump Stops 4.25 Inches Tall (2016-2023) DBR425TU
3rd Gen, Best Gen 4Runner 1996-2002
Reviews
There are no reviews yet.