Toyota 4Runner Rear Bump Stops 5th Gen (2010-2024)

Toyota 4Runner Rear Bump Stops 5th Gen (2010-2024)

Durobumps DBR35 - Rear Bump Stops for 5th Gen Toyota 4Runner (2010-2024)
Toyota 4Runner - 5th Gen - Rear - DBR35 - Highly Rated by Customers
Rear Bump Stops
$229.99 USD
Durobumps DBR35 - Rear Bump Stops for 5th Gen Toyota 4Runner (2010-2024)
Learn More

Tech Specs

  • Part Number: DBR35
  • Vehicle Application: Toyota 4Runner 2010 - 2024
    Size: 5 x 3 x 3 (ea.)
  • Weight: 28 oz. / 1.75 lbs. (set)
  • Lift height: No Lift Required 0-3 inch+ Lift
  • Compression (Deflection): .5 inches @ 1500LBS.
  • Installation Instructions: Toyota 5th Gen 4Runner Installation Instructions
DBR35 rear bump stops for 2010–2024 Toyota 4Runner

Built for Stock Height + Mild Lift Setups

Your 5th Gen Toyota 4Runner is capable out of the box—but factory rear bump stops fall short when the suspension fully compresses. Harsh, abrupt, and lacking real dampening, DuroBumps has your solution.

DuroBumps DBR35 is a direct-fit rear suspension upgrade that delivers real protection where it matters. Made from dual durometer rubber, it compresses smoothly under load—absorbing impact forces before they’re transferred into your chassis. Whether you're daily driving or hitting trails, DBR35 helps improve ride quality without sacrificing articulation.

Perfect for stock-height or mildly lifted 4Runners running factory-length rear shocks, DBR35 is engineered to maintain full suspension travel without interference or premature engagement. This makes it the ideal rear suspension upgrade for builds that need better bottom-out control, improved rear-end stability, and extended suspension component life under real-world driving conditions.

Built for Suspension Articulation + OEM Geometry

The DBR35 bump stops are precision-engineered for the 2010–2024 Toyota 4Runner, installing directly in the OEM location using the factory mounting points. This progressive bump stop upgrade is designed for stock-height or mildly lifted builds that run factory-length rear shocks and want to keep full up-travel and articulation.

Running tires larger than 33" is not recommended, as rear tire clearance may be compromised under full compression. Even with 33s, proper wheel offset is essential to allow the tire to tuck cleanly without contacting the wheel well.

While DBR35 is slightly taller than the OEM bump stop at rest, it compresses to the same final height under load—maintaining full suspension movement without limiting travel or disrupting geometry. Whether you're on road trips, work duty, or backcountry trails, DBR35 helps protect your suspension from hard bottom-outs without sacrificing comfort or performance.

Why Choose DuroBumps?

Confidence You Can Feel. Performance You Can Trust.

Features

Application-Specific Rear Mold
Designed for the 2010–2024 Toyota 4Runner, DBR35 matches factory bump stop locations and suspension clearance requirements with no modification needed.
Progressive Compression Profile
Slightly taller than stock at rest, DBR35 compresses smoothly to match the OEM bump stop’s compressed height under load—preserving full travel while improving damping behavior.
Dual Durometer Rubber Compound
Manufactured with multiple rubber compounds that work together to provide initial softness and final-stage impact resistance—acting more like a coil spring than a solid block of rubber.
Built to OEM Clearance Specs
Engineered for use with factory-length rear shocks and up to 33" tires (with proper wheel offset).
Direct Bolt-On Fitment
Installs using factory rear bump stop mounting points with included hardware. No trimming, drilling, or welding required.
MADE in the USA and Proud of It
DBR35 isn’t just made in the USA—it’s engineered, molded, and quality-controlled right here in Arizona. By choosing DuroBumps, you're supporting American manufacturing, American jobs, and a company that takes pride in delivering top-tier suspension parts without outsourcing a single step. Built for performance. Built to last. Built in the USA—and proud of it.

Benefits

Improves Rear Suspension Control
Reduces harsh bottom-out forces and stabilizes rear suspension movement while maintaining full travel. The result is a more planted, confident feel—on technical trails or highway driving.
No Loss of Up-Travel
Engineered to compress progressively, DBR35 maintains the full rear up-travel your 4Runner was designed for. Perfect for builds that need articulation without compromise.
Enhanced Ride Comfort
Dual durometer rubber provides smooth, progressive dampening similar to a coil spring. Whether you’re commuting or crawling, DBR35 helps reduce shock load and rear-end harshness.
Protects Suspension Components
DBR35 absorbs energy before it’s transferred into your shocks or rear links—helping prevent damage and extend component life under repeated abuse.
Ideal for Factory-Height + Mild Lifts
Optimized for use with stock or mild lift setups and factory-length shocks. No trimming, spacers, or tuning required—just bolt on and go.
Quieter, Smoother Engagement
Progressive rubber dampening delivers smoother, quieter operation. Say goodbye to the sharp “thud” of factory bump stops when your suspension bottoms out.

DUROBLOG

Every trail presents a challenge, and every rig has a story. At DuroBlog, we’re here to guide you through it all—whether it’s understanding the difference between off-road and towing bump stops, learning how to upgrade your suspension, or seeing how DuroBumps can enhance your daily driver. Explore expert insights, hands-on guides, and real-world reviews tailored for off-road enthusiasts like you.

Why doesn’t Durobumps offer extended length front bump stops for the Toyota product line?
December 20, 2024
Spotlight on DuroBumps DBF212: The Ultimate Off-Road Bump Stop
December 13, 2024
Do I need to upgrade my bump stops?
December 13, 2024
Durobumps DBR35 - Rear Bump Stops for 5th Gen Toyota 4Runner (2010-2024)
Toyota 4Runner - 5th Gen - Rear - DBR35 - Highly Rated by Customers
Rear Bump Stops
$229.99 USD
Durobumps DBR35 - Rear Bump Stops for 5th Gen Toyota 4Runner (2010-2024)